Train Sim World®: BR Class 20 'Chopper' Loco Add-On - TSW2 & TSW3 compatible
A veteran in every right, having been in use since the 1950s, the BR Class 20 “Chopper” has earned its place among enthusiasts’ hearts; and now Type 1 traction comes to life in Train Sim World 2, ready for hard-working duty on the Tees Valley Line!
Additional content
This is a DLC for Train Sim World® 3.
Release
Developed in the 1950s, the English Electric Type 1 was the first major step on British Railways’ path to dieselisation. After many trials and failures, the Type 1 showed promise as a 1000hp (746 kW) locomotive, and between 1957 and 1968 a total of 228 would be produced.
The Type 1s took over from steam locomotives of equivalent power, primarily working light, mixed-freight traffic throughout the midlands and in Scotland. Unlike newer locomotives, the Type 1s featured a rather unique single cab design.
The cab, situated at the rear of the locomotive, has controls facing in either direction and gives the locos a tank engine-like appearance, with the diesel engine and on-board equipment sat much like how a firebox and boiler would, in front of the cab. Another steam-like feature was the headcode discs adorning each end of the loco. The first 127 Type 1s were built as such.
Visibility when travelling nose first was quickly realised as a concern, so it became common to see pairs of Type 1s coupled at the nose, allowing for greater view of the track ahead and with the added benefit of doubling the horsepower, meaning they could handle heaver trains.
With the introduction of the TOPS classification system, the EE Type 1s were rebranded as BR Class 20s, although they are known by many as “Choppers” owing to their engines sounding like helicopters when under load.
Despite being some of the oldest diesels around the Class 20s have remained in operational use to this day, and a rather fitting 20 examples have survived into preservation, making them a frequent sight on heritage railways.
A veteran in every right, the Class 20 has earned its place among enthusiasts’ hearts; and now Type 1 traction comes to life in Train Sim World 2, ready for hard-working duty on the Tees Valley Line!
Please note: Train Sim World® 3 is required, as a separate purchase, in order to utilise this content. Features remain unchanged from the original Train Sim World® 2 release. Scenario Planner compatible. Share your creations with the Creator's Club.
The Type 1s took over from steam locomotives of equivalent power, primarily working light, mixed-freight traffic throughout the midlands and in Scotland. Unlike newer locomotives, the Type 1s featured a rather unique single cab design.
The cab, situated at the rear of the locomotive, has controls facing in either direction and gives the locos a tank engine-like appearance, with the diesel engine and on-board equipment sat much like how a firebox and boiler would, in front of the cab. Another steam-like feature was the headcode discs adorning each end of the loco. The first 127 Type 1s were built as such.
Visibility when travelling nose first was quickly realised as a concern, so it became common to see pairs of Type 1s coupled at the nose, allowing for greater view of the track ahead and with the added benefit of doubling the horsepower, meaning they could handle heaver trains.
With the introduction of the TOPS classification system, the EE Type 1s were rebranded as BR Class 20s, although they are known by many as “Choppers” owing to their engines sounding like helicopters when under load.
Despite being some of the oldest diesels around the Class 20s have remained in operational use to this day, and a rather fitting 20 examples have survived into preservation, making them a frequent sight on heritage railways.
A veteran in every right, the Class 20 has earned its place among enthusiasts’ hearts; and now Type 1 traction comes to life in Train Sim World 2, ready for hard-working duty on the Tees Valley Line!
Please note: Train Sim World® 3 is required, as a separate purchase, in order to utilise this content. Features remain unchanged from the original Train Sim World® 2 release. Scenario Planner compatible. Share your creations with the Creator's Club.
Key Features
- BR Class 20 diesel locomotive in BR Railfreight livery
- PGA hopper wagon
- Accurate, true-to-life performance and handling
- Highly detailed, feature-rich, driving cabs with accurate true-to-life performance and handling
- Authentic and detailed sound recordings, recorded from the real locomotives
- Includes three engaging scenarios and interactive training modules for Tees Valley Line
- Operable in Timetable Mode on Tees Valley Line, includes a set of additional timetabled services that increase the level of traffic across the route
- Also operable in Timetable Mode on West Somerset Railway
- Powered by Dovetail Games’ proprietary SimuGraph® vehicle dynamics engine and Unreal Engine 4® technology
- Download size: 128.1 MB
Price
Max: 13,99€
~
Min: 13,99€
Item 1 of 8